Our newest IQ8+ Microinverters are the industry’s first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high-speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems. Part of the Enphase Energy System, IQ8+ Microinverters integrate with the Enphase IQ Battery, Enphase IQ Gateway, and the Enphase App monitoring and analysis software. IQ8+ Microinverters redefine reliability standards with more than one million cumulative hours of power-on testing, enabling an industry-leading limited warranty of up to 25 years. Connect PV modules quickly and easily to IQ8+ Microinverters using the included Q-DCC-2 adapter cable with plug-n-play MC4 connectors. IQ8+ Microinverters are UL Listed as PV Rapid Shut Down Equipment and conform with various regulations, when installed according to manufacturer’s instructions. To purchase this product, please contact your local authorized Enphase distributor.

Enphase IQ 7 > 250 Watt MC4 Micro Inverter - IQ System

The IQ7 micro inverters from Enphase are designed to handle 235 to 350 watt solar panels. The IQ7 is compatible with 60-cell solar panels. 240 Split Phase ONLY

Model	IQ7-60-2-US
Series	IQ7
Manufacturer	Enphase Energy

Mechanical

Type	Grid Tie - Micro Inverter
Ambient Temperature Range	-40°C to +65°C
Approved for wet locations	Yes
Enclosure	Class II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure rating	NEMA Type 6 / outdoor
Cooling	Natural Convection - No fans
Connectors	MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
Dimensions (W x H x D)	8.35" x 6.89" x 1.19" (without bracket)
Weight	2.38 lbs
Shipping Method	Ground

Input (DC)

Commonly used module pairings: Recommended PV Power (STC)	235 W - 350 W
Module compatibility	60-cell PV modules only
Max Voltage	48 V
Peak Power Tracking Voltage	27 V - 37 V
Operating Range	16 V - 48 V
Min/Max Start Voltage	22 V / 48 V
Max DC short circuit current (module Isc)	15 A
Overvoltage class DC port	II
DC port backfeed under single fault	0 A
PV array configuration	1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit

Output (AC)

Peak Output Power	250 VA
Maximum continuous output power	240 VA
Nominal (L-L) voltage/range²	240 V / 211-264 V 208 V / 183-229 V
Maximum continuous output current	1 A @ 240 V 1.15 A @ 208 V
Nominal frequency	60 Hz
Extended frequency range	47 - 68 Hz
AC short circuit fault current over 3 cycles	5.8 Arms
Power factor at rated power	1.0
Maximum units per 20 A branch circuit	16 (240 VAC) 13 (single-phase 208 VAC)
Overvoltage class AC port	III
AC port backfeed under single fault	0 A
Power factor setting	1.0
Power factor (adjustable)	0.7 leading ... 0.7 lagging

Features

Easy to Install

• Lightweight and simple
• Faster installation with improved, lighter two-wire cabling
• Built-in rapid shutdown compliant (NEC 2014 & 2017)

Productive and Reliable

• Optimized for high powered 60-cell modules
• More than a million hours of testing
• Class II double-insulated enclosure
• UL listed

Smart Grid Ready

• Complies with advanced grid support, voltage and frequency ride-through requirements
• Remotely updates to respond to changing grid requirements
• Configurable for varying grid profiles
• Meets CA Rule 21 (UL 1741-SA)

Detailed Desription

Enphase's seventh-generation microinverters are powered by our unique software-defined architecture, offering an efficient design with a single hardware SKU worldwide. The IQ 7 Micro series (IQ7-60-2-US and IQ7PLUS-72-2-US) produces 4% more power, and is 19% lighter and 17% smaller than the IQ 6 series. The IQ 7 continues to offer the same ease of installation with revolutionary 2-wire cabling. It also leverages semiconductor integration for higher reliability and better economies of scale. With the IQ 7 series, Enphase also introduces the Enphase IQ 7X, a 320-watt, high-power microinverter built for 96-cell modules. The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro dramatically simplify the installation process while achieving the highest system efficiency. Part of the Enphase IQ System, the IQ 7 and IQ 7+ Microinverters integrate seamlessly with the Enphase IQ Envoy, Enphase Q Aggregator, Enphase IQ Battery™, and the Enphase Enlighten monitoring and analysis software. IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.

Also known as:

IQ 7 IQ7-60-2-US IQ7 60 IQ Seven