Enphase IQ 7 > 250 Watt MC4 Micro Inverter - IQ System

The IQ7 micro inverters from Enphase are designed to handle 235 to 350 watt solar panels. The IQ7 is compatible with 60-cell solar panels. 240 Split Phase ONLY

Model	IQ7-60-2-US
Series	IQ7
Manufacturer	Enphase Energy

Mechanical

Type	Grid Tie - Micro Inverter
Ambient Temperature Range	-40°C to +65°C
Approved for wet locations	Yes
Enclosure	Class II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure rating	NEMA Type 6 / outdoor
Cooling	Natural Convection - No fans
Connectors	MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
Dimensions (W x H x D)	8.35" x 6.89" x 1.19" (without bracket)
Weight	2.38 lbs
Shipping Method	Ground

Input (DC)

Commonly used module pairings: Recommended PV Power (STC)	235 W - 350 W
Module compatibility	60-cell PV modules only
Max Voltage	48 V
Peak Power Tracking Voltage	27 V - 37 V
Operating Range	16 V - 48 V
Min/Max Start Voltage	22 V / 48 V
Max DC short circuit current (module Isc)	15 A
Overvoltage class DC port	II
DC port backfeed under single fault	0 A
PV array configuration	1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit

Output (AC)

Peak Output Power	250 VA
Maximum continuous output power	240 VA
Nominal (L-L) voltage/range²	240 V / 211-264 V 208 V / 183-229 V
Maximum continuous output current	1 A @ 240 V 1.15 A @ 208 V
Nominal frequency	60 Hz
Extended frequency range	47 - 68 Hz
AC short circuit fault current over 3 cycles	5.8 Arms
Power factor at rated power	1.0
Maximum units per 20 A branch circuit	16 (240 VAC) 13 (single-phase 208 VAC)
Overvoltage class AC port	III
AC port backfeed under single fault	0 A
Power factor setting	1.0
Power factor (adjustable)	0.7 leading ... 0.7 lagging

Features

Easy to Install

• Lightweight and simple
• Faster installation with improved, lighter two-wire cabling
• Built-in rapid shutdown compliant (NEC 2014 & 2017)

Productive and Reliable

• Optimized for high powered 60-cell modules
• More than a million hours of testing
• Class II double-insulated enclosure
• UL listed

Smart Grid Ready

• Complies with advanced grid support, voltage and frequency ride-through requirements
• Remotely updates to respond to changing grid requirements
• Configurable for varying grid profiles
• Meets CA Rule 21 (UL 1741-SA)

Detailed Desription

Enphase's seventh-generation microinverters are powered by our unique software-defined architecture, offering an efficient design with a single hardware SKU worldwide. The IQ 7 Micro series (IQ7-60-2-US and IQ7PLUS-72-2-US) produces 4% more power, and is 19% lighter and 17% smaller than the IQ 6 series. The IQ 7 continues to offer the same ease of installation with revolutionary 2-wire cabling. It also leverages semiconductor integration for higher reliability and better economies of scale. With the IQ 7 series, Enphase also introduces the Enphase IQ 7X, a 320-watt, high-power microinverter built for 96-cell modules. The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro dramatically simplify the installation process while achieving the highest system efficiency. Part of the Enphase IQ System, the IQ 7 and IQ 7+ Microinverters integrate seamlessly with the Enphase IQ Envoy, Enphase Q Aggregator, Enphase IQ Battery™, and the Enphase Enlighten monitoring and analysis software. IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.

Also known as:

IQ 7 IQ7-60-2-US IQ7 60 IQ Seven