•  

    Enphase IQ 7 > 250 Watt MC4 Micro Inverter - IQ System

    The IQ7 micro inverters from Enphase are designed to handle 235 to 350 watt solar panels. The IQ7 is compatible with 60-cell solar panels. 240 Split Phase ONLY
    Model IQ7-60-2-US
    Series IQ7
    Manufacturer Enphase Energy

    Mechanical

    Type Grid Tie - Micro Inverter
    Ambient Temperature Range -40°C to +65°C
    Approved for wet locations Yes
    Enclosure Class II double-insulated, corrosion resistant polymeric enclosure
    Environmental category / UV exposure rating NEMA Type 6 / outdoor
    Cooling Natural Convection - No fans
    Connectors MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
    Dimensions (W x H x D) 8.35" x 6.89" x 1.19" (without bracket)
    Weight 2.38 lbs
    Shipping Method Ground

    Input (DC)

    Commonly used module pairings: Recommended PV Power (STC) 235 W - 350 W
    Module compatibility 60-cell PV modules only
    Max Voltage 48 V
    Peak Power Tracking Voltage 27 V - 37 V
    Operating Range 16 V - 48 V
    Min/Max Start Voltage 22 V / 48 V
    Max DC short circuit current (module Isc) 15 A
    Overvoltage class DC port II
    DC port backfeed under single fault 0 A
    PV array configuration 1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit

    Output (AC)

    Peak Output Power 250 VA
    Maximum continuous output power 240 VA
    Nominal (L-L) voltage/range² 240 V / 211-264 V 208 V / 183-229 V
    Maximum continuous output current 1 A @ 240 V 1.15 A @ 208 V
    Nominal frequency 60 Hz
    Extended frequency range 47 - 68 Hz
    AC short circuit fault current over 3 cycles 5.8 Arms
    Power factor at rated power 1.0
    Maximum units per 20 A branch circuit 16 (240 VAC) 13 (single-phase 208 VAC)
    Overvoltage class AC port III
    AC port backfeed under single fault 0 A
    Power factor setting 1.0
    Power factor (adjustable) 0.7 leading ... 0.7 lagging

    Features

    Easy to Install
    • Lightweight and simple
    • Faster installation with improved, lighter two-wire cabling
    • Built-in rapid shutdown compliant (NEC 2014 & 2017)
    Productive and Reliable
    • Optimized for high powered 60-cell modules
    • More than a million hours of testing
    • Class II double-insulated enclosure
    • UL listed
    Smart Grid Ready
    • Complies with advanced grid support, voltage and frequency ride-through requirements
    • Remotely updates to respond to changing grid requirements
    • Configurable for varying grid profiles
    • Meets CA Rule 21 (UL 1741-SA)

    Detailed Desription

    Enphase's seventh-generation microinverters are powered by our unique software-defined architecture, offering an efficient design with a single hardware SKU worldwide. The IQ 7 Micro series (IQ7-60-2-US and IQ7PLUS-72-2-US) produces 4% more power, and is 19% lighter and 17% smaller than the IQ 6 series. The IQ 7 continues to offer the same ease of installation with revolutionary 2-wire cabling. It also leverages semiconductor integration for higher reliability and better economies of scale. With the IQ 7 series, Enphase also introduces the Enphase IQ 7X, a 320-watt, high-power microinverter built for 96-cell modules. The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro dramatically simplify the installation process while achieving the highest system efficiency. Part of the Enphase IQ System, the IQ 7 and IQ 7+ Microinverters integrate seamlessly with the Enphase IQ Envoy, Enphase Q Aggregator, Enphase IQ Battery™, and the Enphase Enlighten monitoring and analysis software. IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.

    Also known as:

    IQ 7 IQ7-60-2-US IQ7 60 IQ Seven
    [/fusion_toggle][/fusion_accordion] https://youtu.be/rEVgEo4up-I
  • Enphase's seventh-generation microinverters are powered by our unique software-defined architecture, offering an efficient design with a single hardware SKU worldwide. The IQ 7 Micro series produces 4% more power, and is 19% lighter and 17% smaller than the IQ 6 series. The IQ 7 continues to offer the same ease of installation with revolutionary 2-wire cabling. It also leverages semiconductor integration for higher reliability and better economies of scale. With the IQ 7 series, we also introduce the Enphase IQ 7X, a 320-watt, high-power microinverter built for 96-cell modules. The smart-grid ready Enphase IQ 7 Microinverter series is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics. Its polymeric enclosure and revolutionary cabling system simplify installation.
    • Optimized for high powered 60-cell, 72-cell* and 96-cell** modules
    • Max Output Power: 250 VA (IQ 7) or 295 VA (IQ 7+) or 320 VA (IQ 7X)
    • Recommended PV module input power: 235-350+ W (IQ 7) or 235-440+ W (IQ 7+) or 320-460+ W (IQ 7X)
    • MPPT Range: 27V - 37V (IQ 7), 27V - 45V (IQ 7+), 51V - 64V (IQ 7X)
    • 97.5% CEC Efficiency**
    • Configurable for variable grid profiles like Hawaiian Electric Company (HECO) Rule 14H, California Rule 21, and others
    • Download the IQ 7 / IQ 7+ Data Sheet | Download
    • Download the IQ 7X Data Sheet | Download
    * The IQ 7+ Micro is required to support 72-cell modules ** The IQ 7X Micro is required to support 96-cell modules
      https://youtu.be/rEVgEo4up-I
  • Enphase IQ8 Microinverters | Pacific Sun Technologies Our newest IQ8 Microinverters are the industry’s first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high-speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems. Part of the Enphase Energy System, IQ8 Microinverters integrate with the Enphase IQ Battery, Enphase IQ Gateway, and the Enphase App monitoring and analysis software. IQ8 Microinverters redefine reliability standards with more than one million cumulative hours of power-on testing, enabling an industry-leading limited warranty of up to 25 years. Connect PV modules quickly and easily to IQ8 Microinverters using the included Q-DCC-2 adapter cable with plug-n-play MC4 connectors. IQ8 Microinverters are UL Listed as PV Rapid Shut Down Equipment and conform with various regulations, when installed according to manufacturer’s instructions.
    Category: Single-phase Grid tied
    Type: Micro-inverter
    Topology: Isolated with Transformer
    Enclosure Ratings: IP67
    Dimensions: 1.49 × 7.52 × 8.62 in
    Weight: 2.38 lb
    • Peak output power: 245 VA
    • Input power: 235 - 350+ W
    • Maximum continuous output power: 240 VA
    • Operating range: 25 - 48 V
    Length 212.00 mm
    Width 176.00 mm
    Height 30.20 mm
    Weight 2.38 lbs
    https://youtu.be/rEVgEo4up-I
  • Untitled Our newest IQ8+ Microinverters are the industry’s first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high-speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems. Part of the Enphase Energy System, IQ8+ Microinverters integrate with the Enphase IQ Battery, Enphase IQ Gateway, and the Enphase App monitoring and analysis software. IQ8+ Microinverters redefine reliability standards with more than one million cumulative hours of power-on testing, enabling an industry-leading limited warranty of up to 25 years. Connect PV modules quickly and easily to IQ8+ Microinverters using the included Q-DCC-2 adapter cable with plug-n-play MC4 connectors. IQ8+ Microinverters are UL Listed as PV Rapid Shut Down Equipment and conform with various regulations, when installed according to manufacturer’s instructions. To purchase this product, please contact your local authorized Enphase distributor.
    Category: Single-phase Grid tied
    Type: Micro-inverter
    Topology: Isolated with Transformer
    Enclosure Ratings: IP67
    Dimensions: 1.49 × 7.52 × 8.62 in
    Weight: 3.3 lb
    Peak Efficiency: 97.00%
    CEC Efficiency: 97.00%
    Recommended PV Input (STC): 350 Watts
    Maximum DC Input Voltage: 62.00 Volts
    Maximum DC Input Current: 15.00 Amps
    Min MPPT Voltage: 27.00 Volts
    Max MPPT Voltage: 45.00 Volts
    Number of MPPT's: 1
    AC Voltages: 208 Volts or 240 Volts
    AC Frequencies: 60Hertz
    Continuous AC Power Output: 290 Watts
    Min Operating Voltage: 16.00 Volts
    Max Operating Voltage: 62.00 Volts
    Positive Input Channels: 1
    Negative Input Channels: 1
      https://youtu.be/rEVgEo4up-I
  • Out of stock

    Category: Single-phase Grid tied
    Type: String inverter
    Topology: Transformerless
    Enclosure Ratings:
    Peak Efficiency: 97.50%
    CEC Efficiency: 97.00%
    Recommended PV Input (STC): 4560 Watts
    Maximum DC Input Voltage: 600.00 Volts
    Maximum DC Input Current: 18.00 Amps
    Min MPPT Voltage: 195.00 Volts
    Max MPPT Voltage: 480.00 Volts
    Number of MPPT's: 2
    AC Voltages: 208 Volts/240 Volts
    AC Frequencies: 60Hertz
    Continuous AC Power Output: 3800 Watts
    Min Operating Voltage: 100.00 Volts
    Max Operating Voltage: 550.00 Volts
    Positive Input Channels: 2
    Negative Input Channels: 2
  • Out of stock

    SMA Sunny Boy 3kW TL 240 / 208 VAC w/ AFCI 1 MPPT Inverter w/ DC Disconnect SB 3000TL-US-22

    Combiners and Fuses not included. The Sunny Boy 3000TL-US/3800TL-US/4000TL-US/5000TL-US/6000TL-US/7000TL-US/7700TL-US  represents the next step in performance for UL certified inverters. Its transformerless design means high efficiency and reduced weight. Maximum power production is derived from wide input voltage and operating temperature ranges. Multiple MPP trackers and OptiTrac™ Global Peak mitigate the effect of shade and allow for installation at challenging sites. A unique Secure Power Supply feature provides daytime power even in the event of a grid outage. High performance, flexible design and an innovative feature set make the Sunny Boy TL-US series the first choice among professionals.
    Category: Single-phase Grid tied
    Type: String inverter
    Topology: Transformerless
    Enclosure Ratings:
    Peak Efficiency: 97.20%
    CEC Efficiency: 96.50%
    Recommended PV Input (STC): 3600 Watts
    Maximum DC Input Voltage: 600.00 Volts
    Maximum DC Input Current: 18.00 Amps
    Min MPPT Voltage: 155.00 Volts
    Max MPPT Voltage: 480.00 Volts
    Number of MPPT's: 2
    AC Voltages: 208 Volts/240 Volts
    AC Frequencies: 60Hertz
    Continuous AC Power Output: 3000 Watts
    Min Operating Voltage: 100.00 Volts
    Max Operating Voltage: 550.00 Volts
    Positive Input Channels: 2
    Negative Input Channels: 2
  • Out of stock

    SMA Sunny Boy 3kW TL 240 / 208 VAC w/ AFCI 1 MPPT Inverter w/ DC Disconnect SB 3000TL-US-22

    Combiners and Fuses not included. The Sunny Boy 3000TL-US/3800TL-US/4000TL-US/5000TL-US/6000TL-US/7000TL-US/7700TL-US  represents the next step in performance for UL certified inverters. Its transformerless design means high efficiency and reduced weight. Maximum power production is derived from wide input voltage and operating temperature ranges. Multiple MPP trackers and OptiTrac™ Global Peak mitigate the effect of shade and allow for installation at challenging sites. A unique Secure Power Supply feature provides daytime power even in the event of a grid outage. High performance, flexible design and an innovative feature set make the Sunny Boy TL-US series the first choice among professionals.
    Category: Single-phase Grid tied
    Type: String inverter
    Topology: Transformerless
    Enclosure Ratings: NEMA 3R
    Peak Efficiency: 97.10%
    CEC Efficiency: 96.50%
    Recommended PV Input (STC): 3200 Watts
    Maximum DC Input Voltage: 600.00 Volts
    Maximum DC Input Current: 18.00 Amps
    Min MPPT Voltage: 125.00 Volts
    Max MPPT Voltage: 500.00 Volts
    Number of MPPT's: 2
    AC Voltages: 208 Volts/240 Volts
    AC Frequencies: 60Hertz
    Continuous AC Power Output: 3000 Watts
    Min Operating Voltage: 125.00 Volts
    Max Operating Voltage: 600.00 Volts
    Positive Input Channels: 4
    Negative Input Channels: 4
  • Out of stock
    SolarEdge 320W Power Optimizers w/ MC4 Compatible Connectors P320-2NM4ARS​​ For high-power 60-cell modules The SolarEdge power optimizers maximize energy throughput from each and every module through constant tracking of Maximum Power Point individually per module. Furthermore, the power optimizers automatically maintain a fixed string voltage, allowing optimal efficiency of the SolarEdge inverter and giving installers greater flexibility to design optimal PV systems. The power optimizers also monitor the performance of each module and communicate performance data to the SolarEdge monitoring portal. Each power optimizers is equipped with the unique SafeDC™ feature which automatically shut down modules' voltage whenever inverter or grid power are shut down.
    • At least 1 meter long
    • At least NEMA 4 rated
    • MC4 Compatible Input Connector​
    Category: DC Optimizers
    Peak Efficiency: 99.50%
    CEC Efficiency: 98.80%
    Recommended PV Input (STC): 302
    Maximum DC Input Voltage: 48.00 Volts
    Maximum DC Input Current: 13.80 Amps
    Min MPPT Voltage: 8.00 Volts
    Max MPPT Voltage: 48.00 Volts
    Min Operating Voltage: 8.00 Volts
    Max Operating Voltage: 48.00 Volts
  • Out of stock
    SolarEdge 400W Power Optimizers w/ MC4 Compatible Connectors P400-2NM4ARM For 72 & 96-cell modules The SolarEdge power optimizers maximize energy throughput from each and every module through constant tracking of Maximum Power Point individually per module. Furthermore, the power optimizers automatically maintain a fixed string voltage, allowing optimal efficiency of the SolarEdge inverter and giving installers greater flexibility to design optimal PV systems. The power optimizers also monitor the performance of each module and communicate performance data to the SolarEdge monitoring portal. Each power optimizers is equipped with the unique SafeDC™ feature which automatically shut down modules' voltage whenever inverter or grid power are shut down.
    • At least 1 meter long
    • At least NEMA 4 rated
    • MC4 Compatible Input Connector
    Category: DC Optimizers
    Peak Efficiency: 99.50%
    CEC Efficiency: 98.80%
    Recommended PV Input (STC): 400 Watts
    Maximum DC Input Voltage: 80.00 Volts
    Maximum DC Input Current: 12.50 Amps
    Min MPPT Voltage: 8.00 Volts
    Max MPPT Voltage: 80.00 Volts
    Min Operating Voltage: 8.00 Volts
    Max Operating Voltage: 80.00 Volts
  • SolarEdge SE7600A-USS Single Phase Inverter The SolarEdge PV inverter combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. A proprietary data monitoring receiver has been integrated into the single phase solar inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge monitoring portal for performance analysis, fault detection and troubleshooting of PV systems. The single phase inverter comes with a built-in DC switch, is lightweight and can be installed by a single person on a supplied bracket. Single Phase Inverter Feature highlights
    • Solar inverters specifically designed to work with power optimizers
    • Superior efficiency (>97%)
    • Excellent reliability with standard 12 year warranty (extendable to 20 or 25 years)
    • Small, lightweight and easy to install
    • Built-in module-level monitoring receiver
    • Communication to internet via broadband or wireless ZigBee
    • IP65 / NEMA 3R Outdoor and indoor installation
    • Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance
    • Optional Rapid Shutdown functionality for NEC 2014 690.12
    • Optional revenue grade data, ANSI C12.1
    • Installation Guide| Download
    • Product Specifications | Download
    Specification SolarEdge Single Phase Inverter SE3000A-US SE3800A-US SE5000A-US SE6000A-US SE7600A-US SE10000A-US SE11400A-US
    Output
    Nominal AC Power Output (VA) 3300 3840 5000 6000 7680 9980 @ 208V10000 @240V 11520
    Max. AC Power Output 3650 4150 5400 @ 208V5450 @240V 6000 8350 10800 @ 208V10950 @240V 12000
    AC Output Voltage Min.-Nom.-Max.* 211 - 240 - 264 Vac 183 - 208 - 229 Vac 211 - 240 - 264 Vac 183 - 208 - 229 Vac 211 - 240 - 264 Vac
    AC Frequency (Nominal) 59.3 - 60 - 60.5 Hz
    GFDI 1 A
    Input
    Recommended Maximum DC Power (Module STC) 4100 W 4800 W 6250 W 7500 W 9600 W 12400 W 14400 W
    Transformer-less, Ungrounded Yes
    Max. Input Voltage 500 Vdc
    Nom. DC Input Voltage 325 @ 208V / 350 @ 240V
    Max. Input Current 11 Adc 13 Adc 16.5 @ 208V15.5 @ 240V 18 Adc 23.5 Adc 33 @ 208V30.5 @ 240V 35 Adc
    Max. Input Short Circuit Current 30 45
    Reverse-Polarity Protection Yes
    Ground-Fault Isolation Detection 600 k Sensitivity
    Maximum Inverter Efficiency 97.7% 98.2% 98.3% 98.3% 98 % 98 % 98 %
    CEC Weighted Efficiency   97.5 % 98 % 97.5 @ 208V98 @ 240V 97.5 % 97.5 % 97.5 @ 208V98 @ 240V 97.5 %
    Nighttime Power Consumption < 2.5 W < 4 W
    Additional Features
    Supported Communication Interfaces RS485, RS232, Ethernet, Zigbee (optional)
    Standard Compliance
    Safety UL1741, UL1699B, UL1998 , CSA 22.2
    Grid Connection Standards  IEEE1547
    Emissions FCC part15 class B
    Installation Specifications
    AC Output 3/4 minimum / 24-6 AWG 3/4 minimum / 8-3 AWG
    DC Input conduit size/ # of strings/ AWG range 3/4 minimum / 1-2 strings / 24-6 AWG 3/4 minimum / 1-2 strings / 14-6 AWG
    Dimensions with AC/DC (HxWxD) 30.5 x 12.5 x 7 in775 x 315 x 172 mm 30.5 x 12.5 x 7.5 in  775 x 315 x 191 mm 30.5 x 12.5 x 10.5 in. / 775 x 315 x 260 mm
    Weight with AC/DC Safety Switch 51.2 lbs / 23.2 kg 54.7 lbs / 24.7 kg 88 .4 lbs / 40.1 kg
    Cooling Natural Convection Fans (user replaceable)
    Operating Temperature Range -13 to +140F / -25 to +60C (CAN Version -40 to +60)
    Noise < 25 dBA < 50 dBA
    Protection Rating NEMA 3R
    Category: SolarEdge SE7600A-USS Single Phase Inverter
    Single Phase Inverters for North America SE3000H-US / SE3800H-US / SE5000H-US / SE6000H-US/ SE7600H-US
    SE3000H-US SE3800H-US SE5000H-US SE6000H-US SE7600H-US
    OUTPUT
    Rated AC Power Output 3000 3800 5000 6000 7600 VA
    Max. AC Power Output 3000 3800 5000 6000 7600 VA
    AC Output Voltage Min.-Nom.-Max. (183 - 208 - 229) - - 3 - - Vac
    AC Output Voltage Min.-Nom.-Max. (211 - 240 - 264) 3 3 3 3 3 Vac
    AC Frequency (Nominal) 59.3 - 60 - 60.5(1) Hz
    Maximum Continuous Output Current 208V - - 24 - - A
    Maximum Continuous Output Current 240V 12.5 16 21 25 32 A
    GFDI Threshold 1 A
    Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes
    INPUT
    Maximum DC Power 4650 5900 7750 9300 11800 W
    Transformer-less, Ungrounded Yes
    Maximum Input Voltage 480 Vdc
    Nominal DC Input Voltage 380 400 Vdc
    Maximum Input Current 208V - - 15.5 - - Adc
    Maximum Input Current 240V 8.5 10.5 13.5 16.5 20 Adc
    Max. Input Short Circuit Current 45 Adc
    Reverse-Polarity Protection Yes
    Ground-Fault Isolation Detection 600k Sensitivity
    Maximum Inverter Efficiency 99 99.2 %
    CEC Weighted Efficiency 99 %
    Nighttime Power Consumption < 2.5 W
    ADDITIONAL FEATURES
    Supported Communication Interfaces RS485, Ethernet, ZigBee (optional), Cellular (optional)
    Revenue Grade Data, ANSI C12.20 Optional(2)
    Rapid Shutdown - NEC 2014 and 2017 690.12 Automatic Rapid Shutdown upon AC Grid Disconnect
    STANDARD COMPLIANCE
    Safety UL1741, UL1699B, CSA C22.2, Canadian AFCI according to T.I.L. M-07
    Grid Connection Standards IEEE1547, Rule 21(3), Rule 14 (HI)
    Emissions FCC Part 15 Class B
    INSTALLATION SPECIFICATIONS
    AC Output Conduit Size / AWG Range 0.75-1" Conduit / 14-6 AWG
    DC Input Conduit Size / # of Strings / AWG Range 0.75-1" Conduit /1-2 strings / 14-6 AWG
    Dimensions with Safety Switch (HxWxD) 17.7 x 14.6 x 6.8 / 450 x 370 x 174 in / mm
    Weight with Safety Switch 25.3 / 11.5 lb / kg
    Noise < 25 dBA
    Cooling Natural Convection
    Operating Temperature Range -13 to +140 / -25 to +60(4) (-40˚F / -40˚C option)(5) ˚F / ˚C
    Protection Rating NEMA 3R (Inverter with Safety Switch)

Title

Go to Top